Code:
[3/19/2012 11:27:39 AM] [START OPERATION_ID = RESURRECT]
[3/19/2012 11:28:33 AM] Open serial port...OK
[3/19/2012 11:28:33 AM] Connecting to the RIFF Box...OK
[3/19/2012 11:28:33 AM] Firmware Version: 1.31, JTAG Manager Version: 1.41
[3/19/2012 11:28:33 AM] Selected Resurrector: [Samsung T989 V1.0.4455.18306]
[3/19/2012 11:28:33 AM] 
[3/19/2012 11:28:33 AM] Connecting to the dead body...OK
[3/19/2012 11:28:33 AM] Detected dead body ID: 0x106A10E1 - CORRECT!
[3/19/2012 11:28:33 AM] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
[3/19/2012 11:28:33 AM] Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]
[3/19/2012 11:28:33 AM] 
[3/19/2012 11:28:33 AM] Resurrection sequence started.
[3/19/2012 11:28:33 AM] Establish communication with the phone...OK
[3/19/2012 11:28:33 AM] Initializing internal hardware configuration...OK
[3/19/2012 11:28:33 AM] Uploading resurrector data into memory...OK
[3/19/2012 11:28:33 AM] Starting communication with resurrector...OK
[3/19/2012 11:28:33 AM] 
[3/19/2012 11:28:33 AM] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (KYL00M, 0x0003AB400000 Bytes = 14.68 GB)
[3/19/2012 11:28:33 AM] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (KYL00M, 0x000000080000 Bytes = 0.50 MB)
[3/19/2012 11:28:33 AM] 
[3/19/2012 11:28:33 AM] Flashing the dead body...OK
[3/19/2012 11:28:33 AM] Resurrection complete!
[3/19/2012 11:28:33 AM] [FINISH OPERATION_ID = RESURRECT]