Niki SuperCID and Security Unlocker v0.1
========================================
Brought to you by jockyw2001
(c)2008 jockyw2001
Consider a donation to keep the R&D going
Send your PayPal donation to
jocky_wilson@hotmail.com
Rapidshare:
Download-Link #1:
http://rapidshare.com/files/95890081...ocker.zip.html
Megaupload:
http://www.megaupload.com/?d=EB83Y4CJ
Note for Vista users
====================
This guide will explain how to change your drivers to the xp:
http://www.modaco.com/content/Window...ultimate-guide
You will have problems running the unlocker otherwise. Log in as administrator if you run the ROM update tool and unlocker. That also applies to XP users.
Instructions
============
1. Make sure you installed HardSPL 1.15 MFG If you did not install 1.15 yet follow instructions here:
http://forum.xda-developers.com/showthread.php?t=355730
To verify if HardSPL is correctly installed: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.15.Hard" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.58.16.27"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here:
http://forum.xda-developers.com/showthread.php?t=369502
3. Connect PC and Niki with a USB cable and keep it connected until the last step.
4. Power on the Niki and let it boot into Windows Mobile. On the PC make sure the activesync icon is green.
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run NikiCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished. IMPORTANT: Make sure that the flash correctly finished. The device will restart automatically once the flashing is completed.
6a. Power off and power on in tri-color bootloader mode.
6b. Unplug and replug usb cable and wait 10 seconds
7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
7b. On your PC go into the "step2" directory and run "Niki-supercid.exe".
You should see this:
--------------------
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to
jocky_wilson@hotmail.com
[] Done, your device should now be superCID and Security Unlocked
[] Your device is unlocked and you can change anything anytime
[] Don't forget to flash your original radio
Press Enter to exit
-------------------
If you see this:
----------------
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to
jocky_wilson@hotmail.com
Your CID = HTC__001
[] Failed! Please soft reset and try again
[] To soft reset press and hold camera button and then press reset with stylus
Press Enter to exit
-------------------
then do a soft reset (press and hold the camera button first and then shortly press the reset button with the stylus) and try again.
8. Download the original radio from here:
http://forum.xda-developers.com/showthread.php?t=349375
to the "step3" directory on your PC and flash it with NikiCustomRUU.exe
9. right-click activeync icon and check "Allow USB connections" from Connection Settings
That's all folks
Enjoy and ... donate to keep R&D going! Thx!
Send your PayPal donation to
jocky_wilson@hotmail.com
JockyW
Edit: Niki Security Relocker
Some users with a security unlocked device would like to relock it again e.g. for warranty purposes. Unzip niki-relock.exe from the attached niki-relock.zip into the "step2" directory of the security unlocker (in the same directory there should be niki-supercid.exe). Carry out the same steps as for the security unlocker but in step 7b run niki-relock.exe
